PTEN.com |

34 pc. Metric Tap Set, No. MTS34
The High Carbon Steel 34-piece Metric Plug Tap Set, No. MTS34, from Matco has 3 to 5 threads chamfered and includes two adjustable tap sockets. Additional drive tools (TW98) are necessary for 14mm, 16mm and 18mm sockets. The set is not recommended for cutting new threads.

9 pc. Deep Well Bolt Extractor
Use the Matco 9-piece Deep Well Bolt Extractor, No. MDBX9, on stripped, worn, painted-over, rusted-out, metric or standard bolts or studs with an outside diameter of 1/4" to 3/4". Drive the extractor with either 3/8"-square drive or a wrench using a hexagonal head.

Air Bag Release Tool for GM, No. 55150
The Air Bag Release Tool for GM, No. 55150, from Lisle easily releases SIR module retention springs on GM cars, minivans and light trucks. Heat-treated to resist bending on truck retention springs, the tips of the Release Tool are tapered to make removal easier.

Battery terminal spreader
The BK720IM battery terminal spreader by E-Z Red spreads and cleans clamps in one quick operation to prolong battery terminal life. The spreader also has insulated handles and a new design.

Cable Tie Removal Tool
Cable Tie Removal Tool The ACT Cable Tie Removal Tool features a proprietary cutting head design with smooth, curved tips that slip behind a cable tie to pull it away from the wire harness, simultaneously cutting it without nicks or damage. It is made from heat treated alloy steel, and contains double insulated and cushioned grips, a return spring, lock and properly leveraged scissor-action cutter. Suitable for retrofitting and repairing wire harnesses in assembly and field service applications, it can safely remove plastic, copper or aluminum cable ties up to 1/2" wide.

Crankshaft counter holders for Subaru
Sir Tools offers a full range of special application Pulley/Harmonic Balancer Counter Holders developed for 'Breaking Loose' crank shaft bolts of Subaru engines. The counter holders are engine-specific, mating precisely to the pulley/harmonic balancer face patterns of newer Subaru engines. They are also necessary to achieve proper torque of crank bolt during reinstallation. The Subaru holders are a continuation of Sir Tools' line of crankshaft counter holders for BMW and Honda/Acura.

Disc Brake System Analyzer, No. 007884

The Disc Brake System Analyzer, No. 007884, from Innovative Products of America tests sticky or frozen brake calipers and identifies the cause of the uneven brake pad wear. The analyzer also:

• Tests improperly adjusted proportioning valves, air-in hydraulic brake systems, power booster problems, imploded brake hoses and more.
• Comes with two load cells attached to analog gauges, each with a range of 0-5,000 psi/0-350 BAR.
• Features a red "tell tail" memory needle on the dial allowing for one-man brake testing.
  

EZ Strut Compressor

Techny’s EZ Strut Compressor was designed as an ideal strut spring compressor for SUVs and pick-ups. It works on virtually all vehicles equipped with coil over struts. The tool hydraulically compresses conical, offset and tight wound springs without having to turn a lead screw. Compressing arms with a pivoting head self seats to a variety of strut mounts and compresses the spring while keeping the spring and strut aligned. Also, stationary and movable locking jaws accommodate a variety of spring diameters and helix variations, without replacement.

GM Multifunction Switch Tool
The GM Multifunction Switch Tool, No. GMSTB25, from Snap-on, helps techs avoid removing parts of the steering column from GM vehicles when removing the multifunction (turn signal / dimmer / windshield wiper) switch. This specialty tool works on more than 50 GM vehicles; it consists of a low-profile, 1/4" bit wrench with a T25 Ball Torx bit. The tool is heat-treated for strength and durability, chromeplated for optimal wear resistance and features magnetic bit retention.

GM WaterPump Holding Tool
The GM WaterPump Holding Tool, No. 6616, from OTC, an SPX brand, holds the timing chain in place so the water pump on GM 2.2L and 2.4L EcoTech motors -- found in Chevrolet, Oldsmobile, Pontiac and Saturn platforms -- can be removed for service without affecting the timing. The holding tool allows easy application regardless of timing-chain orientation, and services GM vehicles from 2002 to current models.

Interference Hunter

The Interference Hunter from Lenehan Research quickly identifies coil-on-plugs that radiate interference into sensors as well as engine and dash wiring on Ford models, which causes stalling, surging, many false codes and poor fuel mileage. This low-cost, handheld tool tests in minutes without removing coils, using an inductive probe, and should be used before the scan tool to confirm there are no false codes. The device indicates a "pass" or "fail" notice on up to 10 coil-on-plugs as well as radiating alternators.

LT-680 Lower Control Arm Tool
Lock Technology's LT-680 Lower Control Arm Tool was designed to ease C-V axle and strut repair by performing the job safely and in a shorter amount of time. The tool removes all ball joints without damage, and will not damage rubber boots. Instillation is also hassle-free, making strut replacement a breeze.

MultiTorque Adjustable Torque Wrench Screwdriver

In machining and delicate assembly work, it is extremely important to control the tightening torque for screws. MultiTorque Adjustable Torque Wrench Screwdriver from PB Swiss Tools makes it easy to check and maintain screw tightening torques with innovative features and benefits.

• Digital display with adjustable settings
• +/- 6 percent accuracy
• Range: 3.2 -16Nm(2.4-11.8ft/lbf)
• Integrated battery with 10-year life
• More than 40 types of interchangeable blades/bits

Piston wrist pin lock installation tool
Lock-In-Tool offers a patented tool that simplifies the installation of piston wrist pin locks and reduces labor time to seconds. Lock-In-Tool helps avoid damage to pistons, broken and bent pin locks, and personal injury. The tools are available for spiral lock or wire lock applications and come in a variety of SAE and metric sizes.

Pneumatic pin popper guide and chisel
The Dent Fix pneumatic pin popper guide and chisel is designed to help remove frozen or rusted external door hinge pins. The guide locks the pin chisel in place to avoid bouncing all over the place. The pin chisel is shaped to keep the air hammer away from the door skin. Simply use with your air hammer to finish the job quickly, easily and safely.

Stabilizer Link Kit 33820

Lisle’s Stabilizer Link Kit, No. 33820, easily removes the top steering stabilizer link so the strut can be replaced. The set includes the following:

• 34160 - 8mm Socket: Taurus, Sable, Windstar '96-'04, '04 and newer Ford Trucks, Expedition, and Excursion; '93-'97 and '99-04 Intrepid, Concorde.
• 33890 - 6mm hex bit: '02 and newer GM Suburban, Tahoe, Yukon and Trailblazer.
• 26620 - T-40 Torx bit: Dodge and Chrysler Minivans.
• 26630 - T-45 Torx bit: Volvo.

Toyota/Lexus V6 Cam Seal Remover, No. 65500
SP Tool's V6 Cam Seal Remover, No. 65500, with patent-pending press and pull cup design, allows proper camshaft seal removal on most Toyota and Lexus V6 engines. Made from heat-treated alloy steel and high quality hardware, the works on 1996 and later 3.0L and 3.3L Toyota V6, and 1990 and later 3.0L and 3.3L Lexus V6.

Triple Square Impact Drivers
The Triple Square Impact Drivers from Grey Pneumatic come in standard and 4" extended lengths. The impact drivers are used on Volkswagens, Porsche and Audi as well as Detroit Diesel engines. Applications include transmission plugs, undercarriages, differentials, front axles and caliper bolts. Offered in 3/8" and 1/2" drive, sizes range from M5 to M16 in both standard and tamper-proof versions.

UT-100Si-TC Ultratorch Professional Heat Tool Kit
Cordless soldering iron/flameless heat tool kit Master Appliance's UT-100Si-TC Ultratorch Professional Heat Tool Kit features a self-igniting, butane powered, multi-functional soldering iron, flameless heat tool and hot knife. Other features include:

• Temperatures adjusts up to 1202°F
• Soldering tips have an oxygen-free copper base, ceramic catalyst and extra thick iron and chrome plating for durability and superior thermal conductivity
• Weighs 5.5oz. (100 grams)
• Metal fuel tank provides capacity for up to two hours of use on a full charge
• Comes with 15 optional soldering tips, hot air tips and shrink attachments

VW/Audi Spark Plug Boot Puller and Installer, No. 98180A
With this increased seal and the location of the spark plug boot, SP Tools developed the VW/Audi Spark Plug Boot Puller and Installer, No. 98180A, to access and remove the spark plug boot. Designed to seal and increase contact between the spark plug and spark plug wire, the tool works well in confined areas. The "T" handle gives techs pulling power to remove and replace the most difficult spark plug boot.