PTEN.com |

24mm flare nut wrench 66150

SP Tools’ 24mm flare nut wrench, No. 66150, is designed to slide back into the recessed area of the cylinder head, where the fuel line retainer screws into the head. The special depth and angles flare nut wrench lets users hold the 24mm retainer in place while they loosen the 19mm coupler to the high-pressure fuel lines. This tool is designed for the Cummins common fuel rail set up on the 5.9L motors 2003 and later, and 6.7L 2007 and later. Cummins 5.9L & 6.7L diesel motors can be found in Dodge trucks starting in 2003 and other trucks using the Cummins 5.9L and 6.7L motors with a common fuel rail.

7pc body and fender repair tools kit

Matco Tools’ 7pc body and fender repair tools kit, No. BF47K, features a hammer design with a slightly larger handle for strength and a 2-wedge assembly system for a tight fit. Polished faces are now standard, and the tools are coated with a dry layer of rust preventative for a longer shelf life on tool trucks. The kit is packaged in a blow-molded case with graphic cover.

ASI 9000 axle seal installation kit

Mills Machining’s ASI 9000 axle seal installation kit was designed to make replacing axle seals quick and easy. Its simple design consists of a long knurled handle – nearly 24’ for reaching beyond suspension components. A short handle is ideal for bench installation. The kit also includes four seal adapters that are precision machined to hold seal springs securely and fit over the stub axle. Fits Chrysler, Ford and GM front wheel drive transmissions and some manual transmissions.

bubble flaring tool kit 14825
S&G Tool Aid’s bubble flaring tool kit, No. 14825, can be used on Japanese, European and domestic vehicles. It is for 4.75mm, 6mm, 8mm and 10mm automotive tubing, and can be used without having to remove the brake line from the vehicle. The kit includes a yoke with forcing screw and handle, four adapters, flaring bar and wrench with height gauge.

circuit tester pliers 28850

Lisle’s circuit tester pliers, No. 28850, feature a dual probe/computer safe/polarity indicator to test low voltage 6 to 28V. The first probe flips out, enabling users to check hard-to-reach connections, and can be flipped back when not in use. The second probe with centering V design lets users penetrate the center of the wire every time. Fitting 16 gauge and smaller wire, the tools is safe for use on 12V automotive computer circuits and draws less than 19mA.

EZ Strut Compressor
Techny's EZ Strut Compressor was designed as an ideal strut spring compressor for SUVs and pick-ups. It works on virtually all vehicles equipped with coil over struts. The tool hydraulically compresses conical, offset and tight wound springs without having to turn a lead screw. Compressing arms with a pivoting head self seats to a variety of strut mounts and compresses the spring while keeping the spring and strut aligned. Also, stationary and movable locking jaws accommodate a variety of spring diameters and helix variations, without replacement.

Ford spark plug extractor

Cal-Van’s Ford spark plug extractor, No. 39100, is designed to pull broken and carburized spark plug electrode shields in Ford Triton engines 2004 to the present. Custom built guide works with special extended length tap, to accurately tap for easy extraction of the broken spark plug electrode shield.

GDT5 Honda hub/rotor remover

Try-in Tools’ GDT5 Honda hub/rotor remover has been designed to simplify the task of replacing Accord rotors. The GDT5 replaces brake rotors on the 1990-97 Honda Accord periods. The tool works by mounting to the hub using the lug nuts; and with a turn of the lift bolt the hub and rotor are removed, without the use of a slide hammer or removing any suspension parts, including the axle.

MultiTorque Adjustable Torque Wrench Screwdriver

In machining and delicate assembly work, it is extremely important to control the tightening torque for screws. MultiTorque Adjustable Torque Wrench Screwdriver from PB Swiss Tools makes it easy to check and maintain screw tightening torques with innovative features and benefits.

• Digital display with adjustable settings
• +/- 6 percent accuracy
• Range: 3.2 -16Nm(2.4-11.8ft/lbf)
• Integrated battery with 10-year life
• More than 40 types of interchangeable blades/bits

oil filler OFTOY38

Snap-on’s oil filler, No. OFTOY38, was designed for use on several Toyota, Lexus, Pontiac and Scion vehicles. .The filler securely screws into place, allowing for quicker and cleaner filling. Its unique threaded design enables techs to dispense oil without having to hold onto the filler or worry about messy spills, helping them complete the task with ease.

Pneumatic pin popper guide and chisel
The Dent Fix pneumatic pin popper guide and chisel is designed to help remove frozen or rusted external door hinge pins. The guide locks the pin chisel in place to avoid bouncing all over the place. The pin chisel is shaped to keep the air hammer away from the door skin. Simply use with your air hammer to finish the job quickly, easily and safely.

Rear axle bearing remover
Blue-Point’s rear axle bearing remover is designed to speed rear bearing removal on free floating axles. Techs no longer need a slide hammer for removal when they use this tool, as an impact wrench will work to pull stubborn bearings. The tool removes bearings 1” I.D. to 2 7/8” I.D.

timing gear pliers No. LT-995

Lock Technology’s timing gear pliers, No. LT-995, aid in removal and replacement of timing gears and serpentine belt pulleys. It helps timing gear removal by preventing rotation of timing gear sprocket while retaining nuts or bolts are removed, and prevents camshaft rotation during timing gear removal by eliminating valve/piston interference and subsequent damage. The kit includes six sets of interchangeable composite inserts which safely grip timing gear teeth.

Truck inner tie rod tool

Lisle’s large inner tie rod tool, Mac No. TR545, works on inner tie rods with inaccessible wrench flats on many trucks and SUVs. The long socket slips over the tie rod end and the crows foot engages on the socket for easy removal and installation. This tool comes with four crows feet, sizes 1-7/16”, 33.6mm, 38.4mm and 42mm to fit many Toyota, Nissan, Ford, Lincoln, Mercury and Chevrolet truck and SUV applications. Also fits some Cadillac Escalade, Hummer H2, Honda Passport and Jeep Liberty applications.

Varitemp heat gun VTS-750

Master Appliance’s deluxe Varitemp heat gun, No. VTS-750, features a stable metal stand with a dual adjusting circular base frame, and a pivoting spring-loaded slide handle with ergonomic grip. It is ideal for hands-free or handheld use in maintenance, restoration, repair and production applications. Other features include:

• High speed universal motor with 23cfm air flow.
• Variable temperature control provides dial-in adjustable temperatures up to 1,000 degrees F.
• Heavy-duty die cast aluminum housing with a reinforced, mica-insulated ceramic heating element.
• Double protected element housing and oil-resistant neoprene 3-wire grounded cord set.