PTEN.com |

Autodata's 2009 Tire Pressure Monitoring Systems manual includes the necessary detailed tire removal and installation information required to avoid damage to wheel mounted TPMS sensors and details of when and how to reset the TPMS for domestic and import vehicles from 1997-2009. Also included is the location of tire pressure information and detailed information for the quick interpretation of warning lamps and messages that appear in the instrument panel and multifunction display.

The Snap-on 4-piece brake and fuel line wrench set, No. LW204, includes: a 10 mm (3/8") line wrench (No. LW10); an 11 mm (7/16") line wrench (No. LW11); a 12/13 mm (1/2") line wrench (No. LW1213); and a 14 mm (9/16") line wrench (No. LW14).

• Features spring-torque for a tighter grip on the fitting with increased force on the wrench - up to two times ANSI standards.
• Has compact, fold-out chrome molybdenum wrench heads with black oxide finish.
• Removes even the most worn brake and fuel fittings.
• Provides easy access to tight areas where fittings are found.
• Fits over 90 percent of domestic and import vehicles.

The SP Tools 65130 Honda/Acura Bushing X-Tractor easily and quickly remove and install trailing arm bushing in 15 minutes per side versus the Honda factory "book" time of 1.8 hours per side. The tool comes updated with an adapter ring to fit between the existing cup and bushing for
Acura Integras 1990-1993. No need to disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines and emergency brake cables.

The 67700 Magnetic Washer Remover from SP Tools has small magnets that are designed to aid in the removal of hard to reach washers that are around most types of studs. This dual-ended tool can also be used to help techs in the removal of valve-adjusting buckets and pucks. Manufactured from lightweight and durable glass filled nylon plastic.

Years of development make Hunter's Auto34 Leverless Tire Changer the technology of choice for shops that service performance and custom wheels, including difficult low-profile and run-flat combinations. Three up/down control switches and a rotation pedal control virtually all operations. The Auto34 can change wheels up to 34" and tires up to 54" in diameter.

New from Launch Tech for 2009, the Autobook diagnostic tool features all the vehicle coverage of the X431 Professional Line without the bi-directional and coding/programming capabilities. The Autobook offers subsystem coverate for all carlines including ABS, SRS, body controls, climate controls and more. All connectors and Asian, European and domestic software are included. Comes with one year of free updates.

The NAPA Blue Steel Swivel Handle Jack offers a handle that swivels 360 degrees. With patented Speedy Lift technology and an anti-shock feature that controls the rate of descent under load conditions, this jack lifts 3.5 tons for stability and control. Only available at servicing NAPA Auto Parts stores.

The Mayhew CatsPaw Flexible Lighted Pick Up Tool, No. 45048, extends from 8" to 25". Magnetic on both ends, the tool includes a flexible shaft and three LEDs to reach and see more compact areas.

The Snap-on Cold-Forged Three-Position Adjustable Pliers, No. 47CF, features Talon Grip for more pulling power, and a longer contoured handle for more comfort and better leverage. Diamond-tip serrations provide more pulling power in the angled pulling position. A third position gives even more options and a wider jaw spread works for those tough-to-reach jobs, such as rusty, wide hose clamps.

With 230 ft./lbs. of bolt breakaway torque, the CT4410 3/8" Heavy-Duty Cordless Impact Wrench from Snap-on offers techs heat-treated alloy gears to deliver strength and durability, and reduce the chance of breakage. The CT4410 comes with a powerful 14.4 volt battery system that includes dual rail slide-on batteries with self-aligning terminal block that offers longer battery life.

The DashDAQ II handheld, full-color touchscreen dashboard diagnostic tool from Drew Technologies is for all OBDII-compliant vehicles. Diagnostic trouble codess are explained in a clear and concise manner, not abbreviated, and are easily cleared at the touch of a button. View all parameters singularly or in multiples of up to 24 at a time in round-face analog-style gauges, bar graphs or as digital readouts. Thousands of hours of datalogs can be stored on a removable SD card and viewed on a PC or laptop.

Snap-on developed the Dodge Wheel Hub Removal Adaptor, No. DHP1, specifically designed for Chrysler vehicles including removing the front hubs found on the 3/4-ton and 1-ton Dodge pickup trucks. The DHP1 cuts the flat rate for changing out U-joints, front differential service, ball joints and any front hub service, and takes about one hour to complete both sides.

The Mayhew Dominator 4-pc. Angled Scraper Set, No. 60004, offers a patented angle design for hard-to-reach surfaces. The tools include a capped end with an ergonomic design handle for striking. Cut sizes: 1/2", 3/4", 1" and 1-1/2".

Dominator Bar Vault lock box, No. 80029, from Mayhew holds and securely locks up to four large Dominator Pry Bars. The lock box includes two slots for bars up to 3/4" and two slots for bars up to 1" diameter. Wall mount for the unit for additional security.

The EMissFire Detector from ATS quickly identifies camshaft timing problems through the spark plug hole, and misfiring cylinders from the exhaust tail pipe. The misfire counters provide information on which cylinders misfired and counts how many times the misfire occurred, alerting users to a bank misfire, random misfire or individual misfire.

The EPIQ Powered Tool Storage Unit from Snap-on allows techs to organize and store tools, as well as built-in power access for recharging tools and batteries in the same location. The unit offers a lockable area designed for diagnostic platform and laptop use, while the four-sided, raised lip edge keeps items on the work surface.

Hunter's GSP9600HD ForceMatch balancer crosses platforms with unique capabilities to service passenger cars, light trucks and heavy-duty trucks with one machine. With pinpoint accurate measurement and a robust structural design, the GSP9600HD can balance wheels with rims from 10" to 30" in diameter and assembly weights up to 500 lbs.

The Pro-Cut GYR complete brake repair system directs a technician to make in-spec brake repairs, and then captures the finished condition of each serviced rotor. The system includes a bar code scanner, laptop computer (with GYR application) and on-car brake lathe. A tamper-proof data system captures and records critical brake geometry upon completion of the brake rotor resurfacing. Reports on every repair can be printed, transmitted via email or even harvested from off-site.

The Equus Products INNOVA 3140 Scan Tool diagnoses problems for all 1996 and newer OBDII compliant cars, light trucks, SUVs and minivans, foreign and domestic and some popular OBDI vehicles. Features include:

• Trilingual interface with on-screen definitions in English, Spanish and French.
• All-in-one display showing 25 pieces of information at one time.
• Color-coded System Status LEDs that show quick emissions readiness status.
• Continuous link for performing drive cycles to verify repairs.
• Shows valuable SAE enhanced live and freeze-frame data, and lets user record and playback live data streams and perform bi-directional testing.
• Has complete coverage from modes one to nine.
• Includes memory battery backup for off-car review and analysis.

The Fluid Rx Instant Lubricant Diagnostics system provides on-the-spot testing. Users can place a drop on the test medium and compare the results to the ISO laboratory chart. The test results provide quick lubes and service centers with instant credibility, providing validation of recommended services. Besides routine prevenative maintenance oil and filter changes, the evaluation system can be expanded to cover the condition of related items such as filters, wiper blades, belts and hoses.

The low profile design of Snap-on's IronHead Tool Utility Vehicle makes it ideal for industrial and aviation environments where height restrictions may be of concern. The IronHead units feature a handle brake that acts like a parking brake when the unit is stationary, and an optional hand brake for automotive technicians used for control while moving the unit. The 9' stainless-steel top provides a large continuous work surface. The 20" pneumatic tires supply over 2,000 lbs. of load capacity per wheel and help the unit move easier over rough terrain.

At only 7 lbs. and only 9" tall, the Mac Tools Leak Attack Diagnostic Leak Detector is easy to use both under the hood or under the vehicle. Diagnose leaks with shop air using flow measurements or pressure decay (leak down). Thick "smoke," produced using mineral oil, quickly pin-points the leak location to speed diagnosis and repair. A final leak down test quickly confirms a complete repair eliminating comebacks. The air-safe design does not use a glow plug and eliminates the need for expensive and bulky nitrogen cylinders.

Whether changing shocks, struts or removing lug nuts, Snap-on Tools' new MG725 1/2"-drive impact wrench will help techs get any job done faster. With its unique one-piece housing, the MG725 is an extremely durable, lightweight and balanced unit that minimizes vibration. The impact wrench packs 1,190 ft./lbs. of bolt breakaway torque, combined with a free speed of 8,000 rpm and 1,270 blows per minute.

The Lujan MiniPOD cordless, rechargeable, two-in-one work light and flashlight doubles as a safety light that automatically lights if the power goes out. Computer-controlled with a 360-degree adjustable magnetic holder, the MiniPOD provides more than eight hours as a work light and 12 hours as a flashlight. This light can be recharged in either its 12V car charger or 110V wall charger.

The Electronic Specialties 30-amp Model 310 Max Fuse Buddy Pro Test Kit can measure up to 80 amps through Maxi fuse circuits and covers both mini and ATC fuse sizes, with a third all-purpose test lead set. Fuse Buddy Pro features a deluxe LCD display with full analog bar graph and data hold.

The Drew Technologies Mongoose SCI diagnostic tool includes a cable that connects directly from Chrysler vehicles to a laptop using the USB port. Each cable has built-in electronics using J2534 technology to flash Chrysler vehicles and program security keys. An optional software application is available that logs OBDII parameters, displays live data on analog style gauges, and reads diagnostic trouble codes.

The MV8500 Silverline Elite Automotive Test Kit from Mityvac performs engine performance diagnostics, brake bleeding, fluid transfer, evacuation, sampling and windshield repair with twice the vacuum and pressure output as previous models. The pump produces 28" Hg vacuum or pressure up to 60psi. Surrounded by a protective rubber boot, the gearless diaphragm gauge can be rotated 360 degrees for improved visibilty.

The 1100-K Kevlar Composite 1/2" impact wrench from Aircat introduces upgrades to the tool line with hard-faced chrome parts and upgraded rotor blades. The power tool offers a twin hammer mechanism and comes with a two-year factory warranty. All parts are made in the USA.

The Snap-on Non-Marring Scraper Set, No. PKN500, and Prybar Set, No. PBN500 are made of a unique, highly-engineered, glass-filled composite material originally used in aerospace applications. Each tool in the scraper set has a different tip to easily handle every job. With curved and angled profiles, they are excellent tools for getting into tight spaces to loosen, clean and scrape adhesive, foam, moldings and emblems off of interior automotive surfaces. Snap-on's pry tool set is ideal for removing molding clips, power seat and window buttons and gaskets.

OBDFix.com from Equus Products is an online resource designed to provide a place for North American automotive technicians to network regarding on-board diagnostic repair solutions. OBDFix offers a comprehensive database of OBD I and OBD II repair solutions for virtually all vehicle makes and models. Members can look up DTC definitions, decode VINs, and get specific code-related fixes. Members can also access recalls and retrieve TSBs with code-specific TSBs shown first.

The OK Spark Spark Plug Sensor from OK Spark USA, Inc. uses Plasma Energy Event Recognition technology to check for the presence of an electrical arc in the spark plug. The sensor features an industrial-grade design with overmold grips and can work in any engine that uses a spark plug, including coil-over-plug ignition systems.

The Portable Laser Wheel Alignment System from AdvantageWheelAlignment.com gives professional technicians a fast and easy wheel alignment system, with a laser toe gauge that can measure toe to within .004". The laser toe gauge can measure toe in less than two minutes. The caster camber gauge can take measurements in seconds and has a unique calibration that allows it to be used even on un-level surfaces.

Dent Fix' Protective Sand Paper Dispenser keeps sand paper clean by keeping dust, debris and moisture away. No more wasting adhesive sand paper by tearing off useless sections to get a “fresh” piece. Finger grooves allow users to easily get clean pieces of sand paper and tear off on cutting edge. Can be fitted with a handle or hung up on the wall.

Ratchet with DUAL 80 technology Snap-on Tools' Ratchet with Dual 80 technology, No. FLF80, provides pawls that supply 250 ft.-lbs. of torque, and provides a strong, smooth and reliable operation. Each pawl provides seven teeth in contact with the gear for superior strength. The ratchet is manufactured from special alloy steel, precision forged and heat treated to provide optimum durability. It is designed to operate easily and precisely in tight spots.

The Smoke Pro from Redline Detection functions by puffing smoke into one of the car's sealed systems, which produces tell-tale wisps of smoke and pinpoints the location of the leak. After the leak is repaired, the mechanic uses the Smoke Pro's pressure gauge to perform a decay test to confirm that the system holds pressure, scientifically ensuring that the system is properly sealed.

The Split-Beam Click Wrench family from Precision Instruments is easy to set and does not need to be "turned down" after use. The high-contrast dial makes it easy to read the torque setting, and sturdy construction allows this wrench to perform for years, even in harsh environments.

Streamlight's Stylus Pro LED flashlight uses a .5-Watt High-Flux LED, as well as Micro Optical System technology to deliver twice the light output of the Stylus penlight. The Stylus Pro is an ideal secondary light for auto techs to carry in a pocket or on a tool belt for looking under a hood or chassis. The Stylus Pro measures 5.3", weighs 1.64 oz and provides an output of 24 lumens typical and a continuous regulated runtime of 7.5 hours.

Bartec USA's TECH400 tire pressure monitoring diagnostic tool features a rugged design, compact size, easy-to-use menu system and an easy-to-read display. An activation tool and scan tool all in one, TECH400 activates and decodes the sensors in use today, and then transmits this data directly to vehicles via the OBDII connection. TECH400 is designed for the more challenging TPMS vehicles that require a scan tool in order to complete new sensor registration or tire rotation.

The Dent Fix Tornador Pulse Cleaning Gun with Brush and Reservoir, No. DF-Z010B, connects to an air hose and works much like a pressure washer, using powerful, compressed-air pulses to agitate dirt and free debris. It vaporizes detergent to reach the smallest dust and particles and cleans in the tightest spaces, cracks and crevices. The Tornador runs wet or dry with or without detergent.

Now you can quickly connect to any fuel filler neck and create an air-tight seal in seconds. EVAP testing has never been easier. Simply press the Universal Filler Neck Connector from Redline on the filler neck of any manufacturers' Diagnostic Leak Detector or pressure decay equipment. Use for pressure or smoke testing EVAP, gas tanks, radiators, intakes, crank cases and more.

Snap-on Diagnostics' Verus handheld diagnostic scanner gives technicians the answers they need to manage the customer, the vehicle, the diagnosis and the repair. The scanner offers an integrated scanner, scope, meter and customer history files. Verus includes troubleshooter tips, test procedures, TSBs and wiring diagrams. One-touch navigation is fast and easy on the 10.4" display. Verus uses Windows XP and is equipped for wireless Internet.

From the makers of the Drill Doctor drill bit sharpener, Professional Tool Mfg. offers the Work Sharp knife and tool sharpener/precision grinder. The Work Sharp offers a large flat working surface for precision sharpening and grinding, including knives.